4. Replace the bulb.
5. Refit and screw in the lens.
Courtesy lighting
There is courtesy lighting under the dashboard
on the driver and passenger sides.
1. Insert a screwdriver and gently turn so that
the lens detaches.
2. Remove the blown bulb.
3. Fit a new bulb.
4. Refit the lens.
Cargo area
1. Insert a screwdriver and gently turn so that
the lamp housing comes loose.
2. Remove the blown bulb.
3. Fit a new bulb.
09 Maintenance and service
Replacing bulbs
Vanity mirror lighting*
Removing the mirror glass
1. Insert a screwdriver underneath the lower
edge, in the centre. Carefully prize up the
lug on the edge.
2. Insert the screwdriver under the edge on
both the left and right side (at the black
rubber points) and carefully prize so that
the lens releases at the lower edge.
3. Carefully detach and lift aside the entire
mirror glass and cover.
4. Remove the blown bulb and replace it with
a new one.
*
Option/accessory, for more information, see Introduction.
09
215