Warning Triangle* And Spare Wheel - Volvo V50 Owner's Manual

Warning triangle
Follow the regulations in force for the use of a
warning triangle*. Place the warning triangle in
a suitable place with regard to the traffic.
1. Undo the case containing the warning tri-
angle, it is secured with Velcro straps. Take
the warning triangle from the case.
2. Lower the warning triangle's support legs.
Ensure the warning triangle and its case are
firmly secured in the cargo area after use.
Spare wheel and jack
The car's original jack
The original jack must only be used for chang-
ing wheels. The jack's thread should always be
well greased. The spare wheel, jack and wheel
wrench are found under the floor in the cargo
area.
Taking out the spare wheel
1. Fold the rear edge of the floor mat forward.
2. Release the spare wheel and lift it out.
3. Take out the jack and the wheel wrench.
07 Wheels and tyres

Warning triangle* and spare wheel

Putting the spare wheel and jack into the
cargo area
1. Crank the jack (1) to halfway. The marking
on the plate (2) should line up with the
marking on the arm (3) so that the jack can
fit lying down in the holder.
2. Fold in the handle (4) and place the wheel
wrench (5) on the jack.
3. Put the jack (1) back in the hole on the right
(6). Fasten the spare wheel (7) in the hole
on the left (8).
*
Option/accessory, for more information, see Introduction.
07
179