Volvo V70 Owner's Manual page 231

06 Maintenance and specifications
Lamps
2. Reinstall the lamp housing and locking
pins. Check that they are correctly
inserted.
3. Check the lighting.
The lamp housing must be plugged in and
installed before the lighting is switched on or
the remote control key is inserted into the igni-
tion switch.
Removing the cover
06
Before starting to replace a bulb, see
page 229.
1. Open the lock clamp by pressing up/out.
2. Press down the clips on the cover and
remove it.
Reinstall the cover in reverse order.
230
Dipped beam, halogen
1. Detach the headlamp.
2. Remove the cover.
3. Detach the bulb by pressing the holder
downwards.
4. Unplug the connector from the bulb.
5. Fit the new bulb in the socket and snap it
in. It can only be secured in one position.
Reinstall the parts in reverse order.
Main beam, Halogen
1. Detach the headlamp.
2. Remove the cover.
3. Detach the bulb by turning anticlockwise.
4. Unplug the connector from the bulb.
5. Replace the bulb and align it in the socket
and turn clockwise in order to secure it. It
can only be secured in one position.
Reinstall the parts in reverse order.