Volvo V70 Owner's Manual page 256

4. Tighten the wheel bolts crosswise. It is
important that the wheel bolts are tight-
ened properly. Tighten to 140 Nm. Check
the torque with a torque wrench.
5. Fit on the wheel cover (for cars with steel
rims).
NOTE
The hubcap outlet for the valve must be
located over the valve on the rim when fit-
ted.
06 Maintenance and specifications
WARNING
Never crawl under the car when it is raised
on the jack.
Passengers must leave the car when it is
raised on the jack.
Park the car so that passengers have the car
- or preferably a crash barrier - between
them and the road.
Emergency puncture repair*
General
The emergency puncture repair kit is used to
seal a puncture as well as to check and adjust
the tyre pressure. It consists of a compressor
and a bottle with sealing fluid. The kit works as
a temporary repair. The sealing fluid bottle
Wheels and tyres
must be replaced before its expiration date and
after use.
The sealing fluid effectively seals tyres punc-
tured in the tread.
NOTE
The emergency puncture repair kit is only
intended for sealing tyres with a puncture in
the tread.
The emergency puncture repair kit has limited
capacity to seal tyres which have punctures in
the wall. Do not seal tyres with the emergency
puncture repair kit if they have larger slits,
cracks or similar damage.
12 V sockets for the compressor are located by
the centre console in the front, by the rear seat
and in the cargo area. Choose the electrical
socket that is nearest the punctured tyre.
Taking out the emergency puncture
repair kit
Set up the warning triangle adjacent to a traf-
ficked location. The emergency puncture
repair kit is located under the floor in the cargo
area.
1. Fold the rear edge of the floor mat forward.
2. Unscrew the retaining screw.
*
Option/accessory, for more information, see Introduction.
06
255