Saving Sys Setup Data [Sys User Save]; Loading Sys Setup Data [Sys User Load] - Fostex CR500 Owner's Manual

CD-R/RW MASTER RECORDER CR500 (MENU mode: SYSTEM SETUP menu)

Saving SYS SETUP data [Sys User Save]

Using the "Sys User Save
SYS SETUP data, PLAY SETUP data and contrast level) to the user memory. The saved
setup data can be loaded using the "Sys User Load" menu item (see below for details) at
any time.
Select "Sys User Save
The display changes to show the confirmation screen (where "?" of "Are you sure?" flashes).
To save SYS SETUP/PLAY SETUP data, press the [ENTER/YES] key. To cancel the operation,
press the [EXIT/NO] key.
<Note>: The following setup data is saved to the user memory.
* SYS SETUP:
* PLAY SETUP:
* Contrast level
* To exit the MENU mode, press the [STOP/HOME] key.

Loading SYS SETUP data [Sys User Load]

Using the "Sys User Load
SETUP data, PLAY SETUP data and contrast level) from the user memory.
Select "Sys User Load
The display changes to show the confirmation screen (where "?" of "Are you sure?" flashes).
To load the setup data, press the [ENTER/YES] key. To cancel the operation, press the
[EXIT/NO] key.
<Note>: If you execute "Sys Default Set" (Initializing system memory data) or "Sys
Initial Memory" (Initializing flash memory), the setup data is initialized.
Therefore, even though you execute "Sys User Load", you cannot load the setup data
you saved.
* To exit the MENU mode, press the [STOP/HOME] key.
" menu item, you can save the current setup data (including
" on the SYS SETUP menu screen and press the [ENTER/YES] key.
(1) File name mode
(4) Ref.level
(1) Play mode
(4) Power on play
" menu item, you can load the setup data (including SYS
" on the SYS SETUP menu screen and press the [ENTER/YES] key.
79
(2) Select input (3) Peak hold time
(5) Keyboard sel (6) Digital out
(2) Repeat (3) Auto play