Declaration Of Conformity - Viessmann VITOPLEX 100?LS Installation And Service Instructions Manual

Declaration of conformity

We, Viessmann Werke GmbH & Co KG
responsible body, that the product
Vitoplex 100 LS
conforms to the following standards:
EN 303
EN 50 082 1
EN 50 165
EN 55 014
EN 60 335
EN 61 000 3 2
EN 61 000 3 3
TRD guideline 2003/2
Details according to the Pressure Equipment Directive (97/23/EC):
H Heated pressure vessel
H Class III/IV in accordance with appendix II, diagram 5
H Modules B and D according to appendix III
H Applied regulations: TRD
H Materials according to appendix I, 4.2, b) and TRD
H Anti−corrosion supplement according to appendix I, 2.2 and TRD
The pressure device was tested without equipment (safety equipment).
The pressure device must be equipped in accordance with current national
requirements before installation and the initial start−up.
The pressure equipment meets the requirements of current TRD regulations
in their amended form.
Therefore, the following test periods are suggested:
annually: external test
every three years: internal test and/or strength test designed as water
pressure test.
,
D 35107 Allendorf, declare as sole
This product is identified in
accordance with the following
directives:
73/ 23/EEC
89/336/EEC
97/ 23/EC
This product is certified on the basis
of the EC type test of the heated
pressure vessel (certificate
no. 01 202 620/B 042731 274 04 P)
issued by the TÜV Rheinland/
Berlin Brandenburg, 10882 Berlin,
as follows:
_ 0035
Appendix
29