Cleaning The Multiple Level Electrode; Cleaning The Water Level Indicator - Viessmann VITOPLEX 100?LS Installation And Service Instructions Manual

Further details regarding the individual steps

Cleaning the multiple level electrode

Cleaning the water level indicator

Initial start−up, inspection and maintenance
1. Remove electrode A.
2. Clean electrode tips C.
A
3. Clean the sealing faces and use a
B
new gasket B.
C
4. Install the electrodes and carry out
a safety test in line with the
manufacturer's instructions.
5. Retighten new gaskets after
commissioning.
1. Blow out the water level indicator.
2. Remove upper plug A, and clean
the water level indicator with a
brush.
A
(cont.)
15