Configuring Virtual Drive - NEC Express5800 series User Manual

Configuring Virtual Drive

This section describes the procedures for configuration of VD (virtual drive) using WebBIOS.
Configuration Wizard
When you click [Configuration Wizard] on WebBIOS Top Menu, the screen as shown below
appears. Select the relevant operation, and click [Next] at lower right of the screen.
Clear Configuration
New Configuration
Add Configuration
IMPORTANT:
existing data in the earlier defined drives will be lost.
Allows you to clear existing configuration (RAID information).
Clears the existing configuration and creates a new VD.
Retains the old VD and then adds new virtual drive.
If you create a VD by New Configuration, any
Configuring Your Storage and I/O Blade
4-33