4-60
Configuring Your Storage and I/O Blade
Locate
The Locate command makes an LED on Hard Disk Drive light or blink to confirm the location of
the slot. We recommend you to check the slot of Hard Disk Drive before adding VD or hot spare
disks, reconstructing VD, or replacing Hard Disk Drive.
How to execute Locate command on WebBIOS
1.
Click a Physical Drive to check the location on the WebBIOS Top Menu.
2.
The Physical Drive properties are displayed. Click [Locate].
3.
Click [Go]. The LED of the Hard Disk Drive lights or blinks.