Vertu ASCENT X User Manual page 77

Settings
Using your Vertu phone as a modem
To connect to the internet by using your Vertu phone as a modem:
1. Check that Vertu PC Suite is installed on your computer. For information on
installing Vertu PC Suite, see Installing Vertu PC Suite in Getting started.
2. Connect your Vertu phone to your computer using the data cable or Bluetooth.
For information on connecting your Vertu phone to a computer using the data
cable, see Data cable in Accessories. For information on setting up a Bluetooth
connection, see Bluetooth.
3. If you are using the data cable, select PC Suite in Select USB mode: field.
4. Start Vertu PC Suite on your computer.
5. Click on the Connect to the Internet icon.
6. Click the Configure button.
7. Click the Next button.
8. Select your network operator from the list. then click the Finish button.
9. Click the Connect button.
10.Click the Disconnect button when you have finished your browsing session.
Modifying packet data settings
To modify packet data settings:
1. From the Home screen, select Menu
2. Select Packet data > Packet data settings.
3. Modify the access point settings as required.
Enabling high speed packet access
To enable high speed packet access:
1. From the Home screen, select Menu
2. Select Packet data > HS packet access.
3. Select Enabled.
GPS
For information on GPS settings, see Setting up an external GPS receiver and
Starting navigation in Navigate.
76
Settings > Connectivity.
>
Settings > Connectivity.
>
USB data cable
You can use the USB data cable in the following ways:
• To connect your Vertu phone to a computer using Vertu PC Suite. For further
information, see Vertu PC Suite in Getting started and Using your Vertu
phone as a modem.
• To connect your Vertu phone to a printer supporting PictBridge.
• To connect your Vertu phone to a computer for the phone to be used as a USB
storage device.
If you always use the USB data cable for the same purpose, you can select this in the
settings on your Vertu phone. If you use the USB cable in different ways, you can set
the phone to request the USB usage mode each time it is connected to a device using
the cable.
To set the USB mode:
1. From the Home screen, select Menu
2. Select USB data cable.
3. Select one of the following settings:
• Ask on conn. - to prompt for the USB usage mode whenever connecting.
• PC Suite - to always connect using PC Suite.
• Printing & media - to always connect for printing.
• Data storage - to always connect in data storage mode.
Call
For information on call settings. see Call settings in Call functions.
Settings > Connectivity.
>