Call Barring - Vertu ASCENT X User Manual

Call barring

NOTE: Call barring is only available if it is supported by your service
provider.
Call barring is a network service that allows you to restrict the incoming and outgoing
calls that you receive and make. Contact your service provider for more information
about using this feature.
When outgoing calls are barred, calls may still be possible to the emergency
number(s) programmed into your Vertu phone.
You need to enter the barring password to set up call barring. To obtain this password,
contact your service provider.
To activate or deactivate call barring:
1. From the Home screen, select Menu
2. Select Call barring service.
3. Select an option from the following:
• Outgoing calls - to bar all outgoing calls.
• International calls - to bar all international calls.
• Intl. except to home - to bar all international calls with the exception of calls
made to your home country (defined by your service provider) if abroad.
• Incoming calls - to bar all incoming calls.
• Incoming if abroad - to bar all incoming calls when you are abroad.
4. Select Activate to activate the barring, or Cancel to deactivate it.
TIP: To view the current status of the selected barring, select Check
status.
5. Enter the barring password, then select OK. A confirmation message is
displayed.
To deactivate all call barrings at the same time:
1. From the Home screen, select Menu
2. Select Call barring service.
3. Select Cancel all barrings.
4. Enter the barring password, then select OK.
To change the barring password:
1. From the Home screen, select Menu
2. Select Access codes > Change barring pass.
3. When prompted, enter the current barring password, then select OK.
Settings > Security.
>
Settings > Security.
>
Settings > Security.
>
4. When prompted, enter the new barring password, then select OK.
5. Enter the new barring password again for verification, then select OK. A
confirmation message is displayed.
Security
25