Advertisement
Care and Cleaning
After each use
1.Always remove the power cord from the
power outlet before cleaning and remove
the detachable stainless shaft of the stick
blender.
Note: DO NOT immerse, that is, soak the
detachable shaft of the stick blender in water
because overtime the lubrication on the
bearings can wash away.
2.Wash the detachable shaft under running
water, without use of abrasive detergents.
3.When you have finished cleaning the
detachable shaft of the stick blender, place
it upright so that any water which may
have got in, can drain out.
4.To clean attachments including the lid, the
processing bowl, chopping blade, slicing/
shredding disc, whisk and milk frothing
attachment wipe with warm soapy water.
5.Dry thoroughly.
Important: Blades are extremely sharp, handle
with care.
Note: Should the stainless steel chopping
blade dull from extensive use, sharpening is
recommended at your local sharpening shop
to ensure consistent results.
For a quick wash up
Between processing tasks, hold the stick
blender in the beaker half filled with water
and depress the power button for a few
seconds.
Motor Housing
Clean the motor housing with a damp cloth.
Important: Ensure that the motor housing is
not immersed in water or any other liquid.
13
Hide quick links:
Advertisement
