Light Controls; Windshield Wipers; Daytime Running Lights - Subaru Legacy Quick Reference Manual

Controls

Light Controls

AUTO: The vehicle's lights are automatically on or
off depending on the level of the outside light.
Push up for right
turn signal.
Turns on headlights,
instrument panel
illumination, parking
lights, taillights and
license plate lights.
Push down for
left turn signal.
10
Turns on
fog lights
(if equipped).
Turns on instrument panel lights,
tail lights, parking lights and license
plate lights.
While the light switch is
on, rotate the dial
downward to dim
the instrument panel
illumination. Rotate the
dial upward to make the
illumination brighter. When
the dial is fully rotated
upward, the instrument
panel illumination
becomes full bright.

Windshield Wipers

To turn on the wipers, press the wiper control lever
down one level for intermittent, two levels for low, or
three levels for high speed. Return the lever to the
move the lever up. To spray washer fluid, pull and
hold the lever toward you.

Daytime Running Lights

Daytime running lights are standard on your
vehicle. Only a reduced brightness high beam will
be automatically turned on when the engine has
started and the parking brake is fully released and
The brightness of the illumination of the high beam
headlights is reduced by the daytime running light
system. You must always switch on your headlights
when it's dark outside by turning the light switch to
the position.
OFF
1
INT.
LOW
HIGH
11 11