Table of Contents
Advertisement
CONTROLS
COMBINATION METER DISPLAY CONTROLS
1
Return
2
Scroll Up/Down
3
Scroll Left/Right
4
Enter
For more information, please refer to
"Instruments and Controls" in your Owner's
Manual.
LIGHT CONTROLS
1
AUTO: Rotate the end of the lever to set
your headlights to automatically turn on
or off, depending on the level of light
outside. When in the "AUTO" position,
the headlights will automatically turn on
when the windshield wipers operate
several times.
NOTE: The sensitivity of the automatic
headlights can be adjusted through the
®
STARLINK
multimedia display.
2
Parking Lights: Rotate the end of the lever to turn on the instrument panel
illumination, parking lights, side marker lights, tail lights, and license plate lights.
3
Headlights: Rotate the end of the lever to turn on the headlights, instrument panel
illumination, parking lights, side marker lights, tail lights, and license plate lights. To
flash the headlights, pull the lever toward you, then release. The high beams will stay
on as long as you hold the lever. The headlight flasher works even with the headlight
control switch in the off position.
4
High Beams: Push the lever forward and release to change from low beam to high
beam. Pull the lever rearward and release to return to low beam. When set to the
"AUTO" position, pushing the lever forward also activates the High Beam Assist
(HBA) system, if equipped.
22
Advertisement
Table of Contents
