Cruise Control - Subaru Outback Quick Reference Manual

Cruise Control

• T o activate the cruise control, press the
button. The indicator light on the instrument
panel will turn on. To deactivate cruise
control, press the
• T o cancel the cruise control, push
the brake pedal or press the
"CANCEL" button. If you have
a manual transmission, you can
push in the clutch pedal.
Increase speed
Push up the "RES/SET" switch
to the "RES" side; hold until your
vehicle reaches the desired speed
and release. To increase speed
using the accelerator pedal, press
the pedal until you reach the
desired speed. Push down the
"RES/SET" switch to the "SET"
side to set the speed.
button again.
• P ress the accelerator pedal until
your vehicle reaches the desired
speed. Push the switch to the
"SET" side and release. Ease off
the accelerator pedal. Your vehicle
will maintain the desired speed.
Decrease speed
Push down the "RES/SET" switch
to the "SET" side; hold until your
vehicle slows to the desired speed
and release. To decrease the speed
using the brake pedal, press the
pedal to release cruise control
temporarily. When the speed
decreases to the desired speed,
push down the "RES/SET" switch
to the "SET" side to set the speed.
• T o resume your speed after
canceling, push the switch
to the "RES" side.
23 23