Table of Contents
Advertisement
Chapter 3. Using D4M
1. Basic Operation
1-1. Front Panel & IR Remote Controller
Front Panel
USB Port
Status LED
Lock Key
Remote Control Button
Camera Buttons (1~0)
MENU / EXIT Button
DISPLAY Button
SEQUENCE Button
16
Description
Two USB ports are located on the front panel. A USB mouse
can be connected USB port dedicated only for mouse as
picture directed.
Power,
HDD,
Alarm
>
>
: Indicates Normal system booting
Blink: Indicates Front Cover is not closed properly
On/
Blink: Indicates the heater is on due to low
temperature and needs to wait until it reaches operating
temperature level.
Use a key included in the box to open the door to install or
uninstall the HDD rack. To remove the HDD rack while the
system is running, open the door and wait for about 10
seconds until the Power LED starts flickering for the safe
removal of HDD rack.
Description
Pressing camera buttons and Enter button will cause the
selected camera to display full screen. Buttons are used to
enter passwords.
Enters the Setup Menu. User will need to enter the authorized
password to assess Setup. In Playback mode, MENU button
displays the Playback Menu.
Changes the screen display mode in the current screen or
playback screen.
Displays live channels sequentially.
Advertisement
Table of Contents
