Air Filter - Fortinet FortiGate 5140-R Chassis Manual

Air filter

Air filter
14
2 Enter and confirm a new password for the root account.
The password should be between 5 and 8 characters long and should include a
combination of upper and lower case letters and numbers.
You can use the passwd command to change the root account password at any time.
You can also use the passwd command to remove the root account. Enter the passwd
command and when prompted for a password, press enter to add a blank password.
To use the shelf manager command line interface agent (CLIA)
Once you have logged into the shelf manager CLI you use the Command Line Interface
Agent (CLIA) to enter shelf manager commands. Usually you do this from the Linux
command line by entering clia followed by the required CLIA command verb and
parameters. The CLIA executable connects to the main Shelf Manager software process,
passes the command information to it and retrieves the results.
For example, you can enter the following command to list the most commonly used CLIA
commands:
clia help
You can also the help command to get more information about specific CLIA commands.
For example, use the following command display help for the shelf pwrreorder
command:
clia help shelf pwrreorder
Pigeon Point Shelf Manager Command Line Interpreter
Change the order of FRU Activation and Power Descriptors
instead of <addr> <fru_id> user may use:
board <N>
shm <N>
power_supply <N> (valid in 2.x systems only)
fan_tray <N>
PwrReorder <addr1> <fru_id1> before/after <addr2> <fru_id2>
The FortiGate-5140 chassis includes a front accessible air filter. This filter must be in
place for the FortiGate-5140 chassis to operate normally. If the air filter is not locked into
place this is detected by an air filter presence switch.
Air filters should be inspected regularly and cleaned if dirty or replaced if damaged. If the
filter becomes dirty, clean it with a vacuum or with compressed air. The filter meets the
requirements of the Telcordia Technologies Generic Requirements GR-78-CORE
specification.
The air filter can be removed by pulling the air filter handle on the front of the
FortiGate-5140 chassis. To install a new filter, push the air filter into the guide rails at each
side of the shelf until the filter locks into place.
FortiGate-5140 chassis
FortiGate-5140-R Chassis Guide
01-30000-87705-20090108
http://docs.fortinet.com/ • Feedback