Fortigate-5050 Shelf Manager - Fortinet FortiGate 5050 Chassis Manual

FortiGate-5050 shelf manager

FortiGate-5050 shelf manager
8
The FortiGate-5050 chassis includes one or two identical redundant hot-swappable shelf
managers (also called shelf manager cards (SMCs)), located in the dedicated shelf
manager slots on the bottom of the FortiGate-5050 front panel. The primary shelf manager
is installed on the right (SMC 1) the secondary shelf manager is installed on the left
(SMC 2).
The FortiGate-5050 shelf manager supports alarm and shelf management functions.
Figure 3: FortiGate-5050 shelf manager front panel
Alarm
Retention Handle Telco
Screw Alarm
Interface
Table 2 lists and describes the FortiGate-5050 shelf manager LEDs.
Table 2: FortiGate-5050 shelf manager LEDs
LED State Description
Critical Green Normal operation
Major
Red Indicate the level of alarm: critical, major, or minor.
Minor
Hot Swap Blue LED is on when ready to be hot swapped.
Status Green Normal operation.
Ethernet Yellow Port is not forwarding packets.
port
Green Blinking LED indicates network traffic.
Off No link.
Table 3 lists and describes the FortiGate-5050 shelf manager connectors.
Table 3: FortiGate-5050 shelf manager connections
Connector Type Speed
Alarm micro 9600 bps
DB-15
male
Console RJ-45 9600 bps,
8/N/1
Ethernet RJ-45 100Base-T Ethernet
Critial, Major, and Hot Swap and
Minor Alarm LEDs Status LEDs
Critical
Hot Swap
Major
Status
Minor
Alarm
Console Ethernet
Reset
Alarm RS-232
10/100 base-T
Retention
Ethernet
LED Console Screw
Reset Port
Button
Protocol Description
RS-232 The external dry relay Telco alarm
serial interface (48VDC) provides Telco form-c
relay connections for minor, major and
critical power faults.
RS-232 Serial connection to the command line
serial interface.
Provides access to Telnet , Web or SNMP
management methods.
FortiGate-5050 chassis
FortiGate-5050 Chassis Guide
01-30000-87211-20090106
http://docs.fortinet.com/ • Feedback