Vehicle Identification Number; Engine Number - Ford galaxy 1998 Taurus Owner's Manual

Capacities and specifications
IDENTIFYING YOUR VEHICLE
Safety compliance label
The National Highway Traffic
Safety Administration Regulations
require that a Safety Compliance
Certification Label be affixed to a
vehicle and prescribe where the
Safety Compliance Certification
Label may be located. The Safety
Compliance Certification Label is
located on the front door latch
pillar on the driver's side.

Vehicle identification number

The vehicle identification number
is attached to a metal tag and is
located on the driver side
instrument panel.

Engine number

The engine number (the last eight
numbers of the vehicle
identification number) is stamped
on the engine block, transmission,
frame and transfer case (if so
equipped).
206
MFD. BY FORD MOTOR CO. IN U.S.A.
DATE: XXXXX
FGAWR: XXXXXX/XXXXXXX
THIS VEHICLE CONFORMS TO ALL APPLICABLE FEDERAL
MOTOR VEHICLE SAFETY STANDARDS IN EFFECT ON THE
DATE OF MANUFACTURE SHOWN ABOVE.
VIN: XXXXXXXXXXXXXXXXX
MAXIMUM LOAD=OCCUPANTS + LUGGAGE=XXXKG/XXXXLB
OCCUPANTS: X TOTAL X FR X 2ND X RR OCCUPANTS LUGGAGE
TIRE: XXXX/XXXXX XXX
PRESSURE (FR) XXX kPa/33 PSI COLD
PRESSURE (RR) XXX kPa/33 PSI COLD
TRAILER TOWING - SEE OWNER GUIDE
EXT PNT: XXXXXX XXXXXX RC: XX DSO: XXXX F0000
BAR INT TR TP/PS R AXLE TR SPR
X XX XXX X XX
AIR BAG
XXXXXXXXXXXXXXXXX
GVWR:XXXXX LB/ XXXXX KG
RGAWR: XXXXXXX/XXXXXXX
TYPE: XXXXXXXXXXXXXXX
XX XXXKG/XXXXLB
X XXXKG/XXXXLB
T0000
X XXXX
UTC FOHT-15294A10-GA