Table of Contents
Advertisement
Maintenance and care
who manufactures, repairs,
services, sells, leases, trades
vehicles, or supervises a fleet of
vehicles are not permitted to
intentionally remove an emission
control device or prevent it from
working. Information about your
vehicle's emission system is on the
Vehicle Emission Control
Information Decal located on or
near the engine. This decal
identifies engine displacement and
gives some tune up specifications.
Please consult your "Warranty
Guide" for complete emission
warranty information.
Readiness for
inspection/maintenance (I/M)
testing
In some localities, it may be a legal
requirement to pass an I/M test of
the on-board diagnostic (OBD-II)
system. If your "check
engine/service engine soon" light is
on, reference the applicable light
description in the Warning Lights
and Chimes section of your
owners guide. Your vehicle may
not pass the I/M test with the
"check engine/service engine soon"
light on.
If the vehicle's powertrain system
or its battery has just been
serviced, the OBD-II system is
reset to a "not ready for I/M test"
condition. To ready the OBD-II
system for I/M testing, a minimum
of 30 minutes of city and highway
driving is necessary as described
below:
185
Hide quick links:
Advertisement
Table of Contents
