Activating The Memory Feature; Deactivating The Memory Feature; Replacing The Battery - Ford 2010 F-150 Owner's Manual

Locks and Security

Activating the memory feature

To activate this feature:
1. Position the seat, power mirrors, adjustable pedals and steering
column (if equipped) to the desired positions.
2. Press and hold either the 1 or 2
control on the driver's seat for five
seconds. (A tone will be heard after
1 1 ⁄ seconds when the memory store
2
is done) continue to hold until a
second tone is heard after five
seconds then release the control.
3. Within three seconds press
the control on the remote entry
transmitter.
4. A tone will be heard when the activation is complete.
5. Repeat this procedure for another remote entry transmitter if desired.

Deactivating the memory feature

To deactivate this feature:
1. Press and hold either the 1 or 2 control on the driver's seat memory
⁄ seconds when the
switch for five seconds. (A tone will be heard after 1 1
2
memory store is done) continue to hold until a second tone is heard
after five seconds then release the control.
2. Within three seconds press the control on the remote entry
transmitter.
3. A tone will be heard when the deactivation is complete.
4. Repeat this procedure for another remote entry transmitter if desired.

Replacing the battery

The remote entry transmitter uses one coin type three-volt lithium
battery CR2032 or equivalent.
133
2010 F-150 (f12)
Owners Guide, 1st Printing
USA (fus)