Activating The Memory Feature; Deactivating The Memory Feature; Replacing The Battery - Ford 2005 F-150 Owner's Manual

Locks and Security

Activating the memory feature

To activate this feature:
1. Position the seat and adjustable pedals to the positions you desire.
2. Press the SET control on the
driver's seat.
3. Within 5 five seconds, press one
SET
control on the remote transmitter
and then press the 1 or 2 control on
the driver's door panel to which you
would like to associate with Driver 1
1 2
or Driver 2 positions.
4. Repeat this procedure for another
remote transmitter if desired.

Deactivating the memory feature

To deactivate this feature:
1. Press the SET control on the driver's door seat.
2. Within 5 five seconds, press any control on the remote transmitter
which you would like to deactivate and then press the SET control on
the driver's door panel.
3. Repeat this procedure for another remote transmitter if desired.

Replacing the battery

The remote entry transmitter uses one coin type three-volt lithium
battery CR2032 or equivalent.
To replace the battery:
1. Twist a thin coin between the two
halves of the remote entry
transmitter near the key ring. DO
NOT TAKE THE RUBBER COVER
AND CIRCUIT BOARD OFF THE
FRONT HOUSING OF THE
REMOTE ENTRY TRANSMITTER.
89
2005 F-150 (f12)
Owners Guide (post-2002-fmt)
USA (fus)