Resuming A Set Speed; Increasing Speed While Using Speed Control; Reducing Speed While Using Speed Control - Ford 2010 F-150 Owner's Manual

Driver Controls

Resuming a set speed

Press the RESUME control and
release it. This will automatically
return the vehicle to the previously
set speed.

Increasing speed while using speed control

There are two ways to set a higher
speed:
• Press and hold the SET + control
until you get to the desired
speed, then release the control.
You can also use the SET +
control to operate the Tap-Up
function. Press and release this
control to increase the vehicle set
speed in small amounts by 1 mph
(1.6 km/h).
• Use the accelerator pedal to get to the desired speed. When the
vehicle reaches that speed press and release the SET + control.

Reducing speed while using speed control

There are two ways to reduce a set
speed:
• Press and hold the SET - control
until you get to the desired
speed, then release the control.
You can also use the SET -
control to operate the Tap-Down
function. Press and release this
control to decrease the vehicle
set speed in small amounts by
1 mph (1.6 km/h).
• Depress the brake pedal until the desired vehicle speed is reached and
press the SET + control.
100
2010 F-150 (f12)
Owners Guide, 1st Printing
USA (fus)