Setup Menu; To Change Settings; User System Settings Table - Aprilaire 8910 Owner's Manual

SETUp MENU

HOW TO ENTER THE SETUp MENU TO CHANGE SETTINGS
press [MENU] to enter the main menu .
press [SETUp] to enter the setup menu .
press [Next] or [back] to page through the settings
(the setting is displayed in the message center) .
MESSAGE CENTER
(SCROLLING TEXT)
32
press or to adjust the setting. (selected option
flashes .)
Press [DONE] to save and exit, Or [CANCEl] to exit
without saving .
The Home Comfort Control will discard changes and exit
if nothing is pressed within 60 seconds .
SETUp MENU

USER SySTEM SETTINGS TAblE

The following table is the list of the settings and their details. Default settings are shown in bold .
User system
setting Description
Temperature Set the Home Comfort Control
scale to Fahrenheit or Celsius mode
Screen lockout Screen lockout level
Partial lockout type (only available when screen
lockout is set to partial lockout)
Max Temp Setpoint Select temperature setpoint
Change in Lockout limits (only available when
screen lockout is set to partial)
Max Dehum Select dehumidification setpoint
Setpoint Change in limits (only available when
Lockout screen lockout is set to partial)
Events per day number of program events
per day .
factory default setting (bold) and setting range
fahrenheit
Celsius
Off : No lockout
Partial lockout
Full lockout
Allow changes to fan Mode, System Mode and Setpoints
Allow changes to Fan Mode and Setpoints only
Allow changes to Setpoints only
3 degrees
0 to 20 degrees
5 percent RH
0 to 15 percent RH
4 events per day
2 events per day
33