Table of Contents
Advertisement
Figure 41
Preset parameters
Figure 42
Preset commands
38
AXCESS Programming
Preset parameters and commands
Figure 41 lists preset parameters and Figure 42 lists the preset commands.
Preset parameters
Preset:
1 - 255
TIME: (Optional)
If specified, 0 to 255 in tenth seconds. If not specified, at current rate.
Used for voltage outputs. Used only for recall preset.
SPEED: (Optional)
0 to 127. 0 is slowest and 127 if fastest. If not specified, at current speed.
Used for Motor Drive outputs, including pan/tilt control. Used for Recall
Preset only.
Preset commands
Command
'CP<preset 1-255>'
'PRESET TIMER=time'
Description
Clear a preset from memory.
Examples:
SEND_COMMAND CAM,'CP1'
Clears Preset 1.
SEND_COMMAND CAM,'CP100'
Clears Preset 100.
Set preset timer. The preset timer is the length of
time after a preset is reached that the unit monitors
the preset. If the AXB-F117 overshoots within the
preset time, it will re-activate the preset recall. Time
values are in tenths of a second. A 0 setting
disables the preset timer function. The default
setting is 5.
time = 0-100.
Example:
SEND_COMMAND CAM,'PRESET TIMER=10'
Sets preset timer to 1 second.
AXB-F117 Stealth 1 Camera Controller
Advertisement
Table of Contents
