AMX AXB-F117 Stealth 1 Instruction Manual page 41

AXB-F117 Stealth 1 Camera Controller
Send_Commands (Cont.)
Command
'TILT CURVE=NORMAL'
'TILT CURVE=INVERT'
Description
Adjusts Tilt Up/Down speed curves for
normal mounting position. This keeps the up
and down tilts moving at the same rate for a
given speed.
(Added v1.10)
Example:
SEND_COMMAND CAM,'TILT CURVE=NORMAL'
Sets the tilt curve to normal, for normal
installation position.
Note: This does not reverse the direction of
the pan/tilt motors.
Adjusts Tilt Up/Down speed curves for
inverted mounting position. This keeps the up
and down tilts moving at the same rate for a
given speed.
(Added v1.10)
Example:
SEND_COMMAND CAM,'TILT CURVE=INVERT'
Sets the tilt curve to inverted, for inverted
installation position.
Note: This does not reverse the direction of
the pan/tilt motors.
AXCESS Programming 37