Dmx Traits; Troubleshooting - American DJ Duo Scan RG User Instructions

Duo Scan RG
Duo Scan RG
American DJ - www.americandj.com - Duo Scan RG Instruction Manual Page 17
© ®

DMX Traits

Duo Scan RG
Locate and remove the unit's power cord. Once the cord has been
removed located the fuse holder located inside the power socket.
Insert a flat-head screw driver into the power socket and gently pry
out the fuse holder. Remove the bad fuse and replace with a new one.
The fuse holder has a built-in socket for a spare fuse be sure not to
confuse the spare fuse with active fuse.
Duo Scan RG
Fixture Cleaning:
the internal and external lenses should be carried out periodically to
optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Clean the external optics with glass cleaner and a soft cloth every
20 days.
3. Always be sure to dry all parts completely before plugging the
unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (I.e. smoke, fog residue, dust, dew). In heavy use we recom-
mend cleaning on a monthly basis. Periodic cleaning will ensure lon-
gevity, and crisp beam output.
Duo Scan RG
Trouble Shooting: Listed below are a few common problems that
you may encounter, with solutions.
UC3 Control
No laser output from the unit;
1. Be sure you have turned "ON" the unit.
2. Be sure the external fuse has not blown. The fuse is located on
3. Be sure the fuse holder is completely and properly seated.
4. Be sure the unit is not in blackout mode.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Due to fog residue, smoke, and dust cleaning
the rear panel of the unit.
Tapping on the microphone, quiet or high pitched sounds may
not activate the unit.
American DJ - www.americandj.com - Duo Scan RG Instruction Manual Page 18
© ®
Fuse Replacement
Cleaning
Trouble Shooting