Operating Modes; Dmx Traits - American DJ Vizi Scan LED PRO User Instructions

Vizi Scan LED PRO
ing) or there is a stepper motor failure (defective motor or a
defective motor IC drive on the main PCB).
07Er – GOBO ROTATING error:
This message will appear after a fixture reset, if the magnetic-
indexing circuit malfunctions (sensor failed or magnet is miss-
ing) or there is a stepper motor failure (defective motor or a
defective motor IC drive on the main PCB).
08Er – PRISM error:
This message will appear after a fixture reset, if the magnetic-
indexing circuit malfunctions (sensor failed or magnet is miss-
ing) or there is a stepper motor failure (defective motor or a
defective motor IC drive on the main PCB).
10Er – FOCUS error:
This message will appear after a fixture reset, if the magnetic-
indexing circuit malfunctions (sensor failed or magnet is miss-
ing) or there is a stepper motor failure (defective motor or a
defective motor IC drive on the main PCB).
American DJ - www.americandj.com - Vizi Scan LED PRO Instruction Manual Page 37
®
Error Codes Vizi Scan LED PRO
Operating Modes: The Vizi Scan LED PRO can operate in three
different modes. This next section will detail the differences in
the operating modes.
• Sound Active mode -
The unit will react to sound, chasing through the built-in programs.
• Auto mode -
The unit will run the internal program without the need of sound.
• DMX control mode -
This function will allow you to control each individual fixtures traits
with a standard DMX-512 controller such as the Elation
Designer.
Universal DMX Control:
versal DMX-512 controller such as the Elation
or Elation
wheel, gobo wheel, prism, pan/tilt speed, shutter (strobe), and much
more. A DMX controller allows you to create unique programs tailored
to your individual needs.
1. The Vizi Scan LED PRO has a 12 channel DMX mode and 14
channel DMX mode. To select your desired DMX mode please
see page 24 "FINE" menu See pages 40-47 for detailed descrip-
tion of the DMX traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 12-14 as well as the set-up specifications that are
included with your DMX controller.
3. Use the controller's faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instruction on page 19 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Stand-Alone Operation (Sound Active or Auto Program):
mode allows a single unit to either run to the beat of the music or run
the Auto Program.
1. Access the main menu.
2. Tap the UP button until
American DJ
™
This function allows you to use a uni-
Show Designer™ to control mirror movement, the color
®
"PLAY" is displayed, and Press ENTER.
- www.americandj.com - Vizi Scan LED PRO Instruction Manual Page 38
®
Operation
Show
®
DMX Operator™
®
This