American DJ Fusion Scan 250 User Instructions
American DJ Fusion Scan 250 User Instructions

American DJ Fusion Scan 250 User Instructions

American dj. scanner user instructions
Hide thumbs Also See for Fusion Scan 250:

Advertisement

User Instructions

Rev. 3/08
American DJ
®
6122 S. Eastern Ave.
Los Angeles Ca. 90040
www.americandj.com
Fusion Scan 250 EX™
Unpacking:
Thank you for purchasing the Fusion Scan 250 EX™
by American DJ
. Every Fusion Scan 250 EX™ has been thoroughly
®
tested and has been shipped in perfect operating condition. Carefully
check the shipping carton for damage that may have occurred during
shipping. If the carton appears to be damaged, carefully inspect your
fixture for any damage and be sure all equipment necessary to oper-
ate the unit has arrived intact. In the event damage has been found
or parts are missing, please contact our toll free customer support
number for further instructions. Please do not return this unit to your
dealer without contacting customer support first.
Introduction:
The Fusion Scan 250 EX™ is a six channel, DMX intel-
ligent fixture. The fixture can used in three different operating modes;
stand alone, Master/Slave configuration, or DMX controlled. The
Fusion Scan 250 EX™ can be used as a stand alone sound active
fixture or used in multiples linked in a master/slave configuration. For
best results use fog or special effects smoke to enhance the beams
projections.
Customer Support:
American DJ
support line, to provide help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 9:00 a.m. to
5:00 p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail:
support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Warning!
This may cause severe eye damage. Avoid looking directly
into the light source at all times!
American DJ
- www.americandj.com - Fusion Scan 250 EX™ Instruction Manual Page 2
®
General Information
provides a toll free customer
®

Advertisement

Table of Contents
loading

Summary of Contents for American DJ Fusion Scan 250

  • Page 1: User Instructions

    The fixture can used in three different operating modes; stand alone, Master/Slave configuration, or DMX controlled. The Fusion Scan 250 EX™ can be used as a stand alone sound active fixture or used in multiples linked in a master/slave configuration. For best results use fog or special effects smoke to enhance the beams projections.
  • Page 2: General Instructions

    • UC3 Controller (Not Included) Fusion Scan 250 EX™ The Fusion Scan 250 EX™ carries a 1 year (365 days) limited war- ranty. Please fill out the enclosed warranty card to validate your purchase and warranty. You may also register your product online at www.
  • Page 3 (Figure 1). If you are making your own cables, be sure to use standard two American DJ - www.americandj.com - Fusion Scan 250 EX™ Instruction Manual Page 5 ® Set Up Fusion Scan 250 EX™...
  • Page 4 Data True (+ signal) Pin 3 Not Used Not Used American DJ - www.americandj.com - Fusion Scan 250 EX™ Instruction Manual Page 7 ® Set Up Fusion Scan 250 EX™ Note: After making any adjustments in the operating system, there is a 10 second delay.
  • Page 5 2. The fixture will now run a self test. FHRS - With this function you can display the running time American DJ - www.americandj.com - Fusion Scan 250 EX™ Instruction Manual Page 9 ® System Menu Fusion Scan 250 EX™...
  • Page 6: Operation

    (strobe). A DMX controller allows you to create unique programs tailored to your individual needs. 1. The Fusion Scan 250 EX™ uses six DMX channels. See page 14 for detailed description of the DMX traits.
  • Page 7 2. Sound Strobe selection (12 patterns) 3. Two light Strobe Strobe/Sound Pattern/Sound Mode American DJ - www.americandj.com - Fusion Scan 250 EX™ Instruction Manual Page 13 ® Operation Fusion Scan 250 EX™ Channel This function will allow UC3 Control Gobo/Color Selection...
  • Page 8 A metal cover is provided to protect the scanner mirror during transportation and storage. The protective cover is held in place by two thumb screws. Thumb Screws American DJ - www.americandj.com - Fusion Scan 250 EX™ Instruction Manual Page 15 ® DMX Traits Fusion Scan 250 EX™ Function...
  • Page 9: Troubleshooting

    1. Low frequencies (bass) should cause the unit to react to sound. Tapping on the microphone, quiet or high pitched sounds may not activate the unit. American DJ - www.americandj.com - Fusion Scan 250 EX™ Instruction Manual Page 17 ® Cleaning Fusion Scan 250 EX™...
  • Page 10: Specifications

    Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice. American DJ - www.americandj.com - Fusion Scan 250 EX™ Instruction Manual Page 19 ® Specifications Web: www.americandj.com / E-mail: info@americandj.com ©American DJ Supply...

This manual is also suitable for:

Fusion scan 250ex

Table of Contents