Dmx Configuration - American DJ LED Touch User Instructions

Hide thumbs

Table of Contents

Enlarged version

LED Touch™

all buttons are locked. You can unlock the buttons by press-

ing buttons 1, 3, & 6 at the same time until the unlock icon is

displayed in the LCD. If you want to lock the keyboard again

automatically, press the ENTER/HOLD TIME button until the

LCD displays the unlock icon, then press buttons 1, 3, & 6 at

the same time to lock it.

LED Touch™

In this submenu you can set the DMX Configuration.

1. Enter the Menu mode by pressing the MENU/FADE TIME

button for 3 seconds.

2. Press the UP or DOWN button or turn the JOG WHEEL until

"8. DMX CONFIG" is displayed, press the ENTER/HOLD

TIME button.

3. The LCD will display "CONFIG /[RGBD/S]", "RGBD/S" is

blinking. Press the UP button or use JOG WHEEL to choose

your desired setting. Choose between RGBD/S, RGBD,

RGBW, or RGB.

RGBD/S - This mode is used for lights that have a DMX setup

with Channel 1 is Red, Channel 2 is Green, Channel 3 is

Blue, and Channel 4 is Dimmer/Strobe.

RGBD - This mode is used for lights that have a DMX setup

with Channel 1 is Red, Channel 2 is Green, Channel 3 is

Blue, and Channel 4 is Dimmer.

RGBW - This mode is used for lights that have a DMX setup

with Channel 1 is Red, Channel 2 is Green, Channel 3 is

Blue, and Channel 4 is White.

RGB - This mode is used for lights that have a DMX setup with

Channel 1 is Red, Channel 2 is Green, and Channel 3 is Blue.

4. Once you have figured out your desired DMX configuration

press the ENTER/HOLD TIME button to confirm.

The LED Touch is used to control units with 3 & 4 channels, so

American DJ® www.americandj.com - LED Touch

Lock Keyboard