Altigen ACC 6.7 Administration Manual page 241

Parameter Description
Program- Use the drop-down list to assign one of the following functions to the
mable desired keys:
Keys
—
• N/A
used.
• BLF (Busy Lamp Field)
the field below; this will be associated with the corresponding
programmable key to this extension number; the light in this
programmable key indicates that the extension number is busy or
ringing. You can select the Play Beep Tone check box to also have
the IP phone play an audible beep or one of several different ring tones
when the extension number is ringing.
Note: The BLF feature can be assigned only to internal extension
numbers, not outside numbers.
• Feature Code
field below; this will be associated with the corresponding
programmable key to dial this feature code
• Admin Defined # - when selected, this programmable key can be
configured by the administrator only. Enter a valid number 0~9, *, #,
or F (Flash) in the field below.
One use for this can be to tag a call with an account code by pressing
one button. For example, entering F#321 for programmable key 1 will
cause a connected call to be tagged with account code 1 (F is for Flash,
#32 is the extension feature code, and in this example, 1 is the
account code). Account codes are set up in System Configuration,
Account Code tab.
• Line Park - when selected, enter the Line Park line ID in the field
below. The user can press this programmable key to park a call or to
retrieve a parked call.
• Call Record - when selected, the user can press this programmable
key to start conversation call recording. This only works for extensions
with Record on Demand selected in the Extension Configuration
window.
• WG Status - (IP710 only) When selected, the user can press this
programmable key to see the real-time workgroup status (callers in
queue, longest queue time, number of callers who have waited longer
than the service threshold, and service level).
• User Defined # - (Default) Allows the user to define the
programmable key from the IP phone.
• Headset
list for programmable key 10 (Alti-IP 600) or programmable key 5 (IP
705), the IP phone user will be able to activate a third-party headset
(certified by AltiGen).
• Flash
programmable key is set up as FLASH by default. This key can be re-
assigned in MaxAdmin, using the AltiGen IP Phone Configuration
window. No other programmable keys can be configured to FLASH.
Chapter 17: AltiGen IP Phone Configuration
when selected, the corresponding programmable key cannot be
—
when selected, enter an extension number in
—
when selected, enter an AltiServ feature code in the
—
(Alti-IP 600, IP 705) When configured from the drop-down
—
(Alti-IP 600) Upon initial installation, the lower left
MAXCS ACC 6.7 Administration Manual 227