Setting General Parameters - Altigen ACC 6.7 Administration Manual

Chapter 4: System Configuration

Setting General Parameters

Use the General tab in the System Configuration window to set the system ID, area
code, main number, and country; extensions for the manager, the operator, the MeetMe
conference administrator; and options for distinctive ring, conference bridge, and
system call park.
Figure 9. System Configuration, General tab
You can set the following parameters and options:
Parameter
System ID
Country
44
MAXCS ACC 6.7 Administration Manual
Description
Assign a number (1-100) to the system. This ID will be used
to differentiate call records if multiple systems are writing
call records to the same external database.
If you intend to create a multi-site VoIP domain, this number
will also be the Server ID, which is used and displayed in
Enterprise Manager. In a multi-site VoIP domain, each
System ID/Server ID must be unique and must be the same
length. Once a server is part of a VoIP domain, you cannot
change the System ID.
Select a country for the system. This configuration ties to a
tone table matched to the country's telecom interface
specification.