Table of Contents
Advertisement
Sound Setup
Sound Setup Operation
To display the Sound Setup Menu screen:
Your vehicle must be parked with the ignition key in the ACC or
ON position. To do this, follow the procedures below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the Sound mode operation has been
released. Engaging the parking brake can reactivate the Sound
Setup Menu, as long as the car's ignition has not been turned off.
It is not necessary to repeat the above procedure
(1 through 3) of "To display the Sound mode screen."
Each time the ignition is turned OFF, perform the procedure of "To
display the Sound mode screen."
The following steps 1 to 5 are common operations to each
"Setting item" of Sound Setup. Refer to each section for details.
1
Touch [Setup] icon of Top banner.
The Setup main screen is displayed.
2
Touch [Sound].
The Sound Setup screen appears.
3
Select the desired item.
Setting items: Balance / Fader / Subwoofer / Media Xpander /
Bass Max EQ / Parametric EQ / Time Correction /
X-OVER / Defeat / Volume / Source Volume Setup
44
-EN
4
Touch [
] or [
] etc., to change its setting.
• When the pop-up window for setup is displayed, touch [
close the window after setting.
5
Touch [
] to return to the previous screen.
• Immediately after changing the Sound Setup (while the system is
writing data automatically) do not turn the ignition key to OFF.
Otherwise, the settings may not be changed.
• For details on how to scroll through the list, refer to "Selecting an
Item in a List" (page 26).
Setting the Balance/Fader/Subwoofer
[Balance/Fader/Subwoofer] is selected on the Sound setup menu in
step 3. Refer to "Sound Setup Operation" (page 44).
Adjusting the Balance/Fader
Touch the desired point within the image area. Or touch
[
] [
] [
] [
].
Balance: L15 to R15
Fader: F15 to R15
Rear Speaker Setting
You can set the rear speaker output to "Off."
Setting item: Rear Speaker
Setting contents: On (Initial setting) / Off
• Note that if you select "Off" when the Rear Speaker Position in Car
Specific Sound Setup is set to "Rear Deck" or "Rear Door/Panel,"
the setting in Car Specific Sound Setup will be canceled.
Turning Subwoofer ON/OFF
If an optional subwoofer is connected to the unit, make the following
setting.
Setting item: SubW.
Setting contents: On / Off (Initial setting: Off)
• Note that if you select "Off" when Subwoofer Installed in Car
Specific Sound Setup is set to "Yes, " the setting in Car Specific Sound
Setup will be canceled.
] to
Image area
Advertisement
Table of Contents
