Setup; Audio Setup; Audio Setup Operation; Setting The Balance/Fader/Subwoofer - Alpine ICS-X7HD Owner's Manual

Setup

Audio Setup

Audio Setup Operation

To display the Audio Setup Menu screen:
Your vehicle must be parked with the ignition key in the ACC or
ON position. To do this, follow the procedures below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the Setup operation has been
released. Engaging the parking brake can reactivate the Audio
Setup Menu, as long as the car's ignition has not been turned off.
It is not necessary to repeat the above procedure (1 through 3) of
"To display the Audio Setup Menu screen."
Each time the ignition is turned OFF, perform the procedure of "To
display the Audio Setup Menu screen."
The following steps 1 to 5 are common operations to each
"Setting item" of Audio Setup. Refer to each section for details.
1
Touch [Setup] on the Home screen.
The Setup main screen is displayed.
2
Touch [Audio Setup].
The Audio Setup screen appears.
3
Select the desired item.
If " " appears, there is next hierarchy. Touch the desired
item.
If " " does not appear, proceed to step 4.
Setting items: Balance/Fader/Subwoofer / Application Volume
Setup / Media Xpander / Bass Max EQ / Download
Sound Setting / Defeat / Time Correction / X-OVER
/ Parametric EQ
4
Touch [ ] or [ ] etc., to change its setting.
20
-EN
5
Touch [ ] to return to the main application screen.
Touch [ ] to return to the previous screen.
• Immediately after changing the Audio Setup (while the system is
writing data automatically) do not turn the ignition key to OFF.
Otherwise, the settings may not be changed.
• For details on how to scroll through the list, refer to "Selecting an
Item in a List" (page 16).

Setting the Balance/Fader/Subwoofer

[Balance/Fader/Subwoofer] is selected on the Audio setup menu in
step 3. Refer to "Audio Setup Operation" (page 20).

Adjusting the Balance/Fader

Touch the desired point within the image area. Or touch
[ Front] [ Rear] [
Balance: L15 to R15
Fader: F15 to R15
• To reset to the initial setting (Balance: 0, Fader: 0), touch [Center].

Turning Subwoofer ON/OFF

If an optional subwoofer is connected to the unit, make the following
setting.
Setting item: SubW.
Setting contents: On / Off (Initial setting: Off)

Adjusting the Subwoofer Level

You can set the Subwoofer level when a Subwoofer is connected.
Setting item: SubW. LEVEL
Setting contents: 0 to 15 (Initial setting: 0)
• If the Subwoofer setting is "Off," the setting cannot be set.

Setting the Subwoofer Phase

The subwoofer output phase is toggled Subwoofer Normal (0°) or
Subwoofer Reverse (180°).
Setting item: SubW. Phase
Setting contents: 0° / 180° (Initial setting: 0°)
• If the Subwoofer setting is "Off," the setting cannot be set.
Image area
Left] [Right ].