Saving And Calling The Adjusted Picture Quality; General Setup; General Setup Operation - Alpine ICS-X7HD Owner's Manual

Saving and Calling the Adjusted Picture
Quality
When adjusting audio (video media), you can store the settings made
for "Adjusting Live Contrast, Brightness, Color, Tint, Contrast and
Sharpness."
Setting item: Preset1 / Preset2
1 After completing "Adjusting Live Contrast, Brightness,
Color, Tint, Contrast and Sharpness" (page 26), touch
and hold [Preset1] or [Preset2] to save the settings.
2 Touch [Preset1] or [Preset2] to call the saved settings.
• Visual EQ is registered as "CUSTOM."
• Display Mode cannot be registered.

General Setup

General Setup Operation

To display the General Setup Menu screen:
Your vehicle must be parked with the ignition key in the ACC or
ON position. To do this, follow the procedures below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the Setup operation has been
released. Engaging the parking brake can reactivate the General
Setup Menu, as long as the car's ignition has not been turned off.
It is not necessary to repeat the above procedure (1 through 3) of
"To display the General Setup Menu screen."
Each time the ignition is turned OFF, perform the procedure of "To
display the General Setup Menu screen."
The following steps 1 to 4 are common operations to each
"Setting item" of General Setup. Refer to each section for
details.
1
Touch [Setup] on the Home screen.
The Setup main screen is displayed.
2
Touch [General Setup].
The General Setup screen appears.
3
Touch [ ] or [ ] etc., of the desired item to change
its setting. For items that have "
to display the screen for the next hierarchy.
Setting items: Date/Time / Language / About / BLUETOOTH /
Key Sound Feedback / Screen/LED Customize
• Depending on the item, repeat step 3.
4
Touch [ ] to return to the main application screen.
Touch [ ] to return to the previous screen.
• Immediately after changing the settings of General Setup (While the
system is writing data automatically) do not turn the ignition key to
OFF. Otherwise, the settings may not be changed.
," touch the item
27
-EN