Lubricant Specifications - Ford 2000 E-150 Owner's Manual

Ford motor company 2000 ford e-150 owner's guide
Table of Contents

Advertisement

5
Optional fuel tank 208L (55 gallon).
6
Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. Check the container to verify the fluid being added is of the
correct type. Refer to your Scheduled Maintenance Guide to determine
the correct service interval.
Some transmission fluids may be labeled as dual usage, such as
MERCON and MERCON V. These dual usage fluids are not to be used
in an automatic transmission that requires use of the MERCON type
fluid. However, these dual usage fluids may be used in transmissions that
require the MERCON V type fluid.
MERCON and MERCON V type fluids are not interchangeable.
DO NOT mix MERCON and MERCON V. Use of a transmission
fluid that indicates dual usage (MERCON and MERCON V) in
an automatic transmission application requiring MERCON may
cause transmission damage. Use of any fluid other than the
recommended fluid may cause transmission damage.
7
Indicates only approximate dry-fill capacity. Some applications may
vary based on cooler size and if equipped with an in-tank cooler. The
amount of transmission fluid and fluid level should be set by the
indication on the dipstick's normal operating range.

LUBRICANT SPECIFICATIONS

Item
Brake fluid
Door
weatherstrips
Engine coolant
Capacities and specifications
Ford part
name
High
Performance
DOT 3 Motor
Vehicle Brake
Fluid
Silicone
Lubricant
Ford Premium
Engine Coolant
Ford part
number
C6AZ-19542-AB
F7AZ-19G208-BA
and
F5AZ-19553-AA
E2FZ-19549-AA
(in Canada,
Motorcraft
CXC-8-B)
Ford
specification
ESA-M6C25-A
and DOT 3
ESR-M13P4-A
ESE-M97B44-A
203

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents