Enjoying Audio Sources; Turning On The A-9377; Selecting Speakers; Using Headphones - Onkyo A-9377 Instruction Manual

Enjoying Audio Sources

Turning On the A-9377

POWER
To turn on the A-9377, press the
[POWER] switch.
On the Input Selector, the indicator for
the currently selected source lights up.
When the A-9377 is turned on, to pro-
tect the speakers, it outputs no sound
for about 5 seconds, allowing the inter-
nal circuitry time to stabilize.
To turn off the A-9377, press the
[POWER] switch again.

Selecting Speakers

SPEAKERS selector
You can select which set of speakers outputs sound.
Use the SPEAKERS selector to
select the speakers.
OFF: No speakers output sound.
A: Speaker set A outputs sound.
B: Speaker set B outputs sound.
A+B: Both speaker set A and speaker
set B output sound.
The A and B indicators show which
speaker set is selected.

Using Headphones

You can connect a pair of stereo headphones (1/4-inch
phone plug) to the A-9377's PHONES jack for private
listening.
Notes:
• Always turn down the volume before connecting your
headphones.
• The speakers are not turned off when the headphones
plug is inserted in the PHONES jack. To turn off the
speakers, set the SPEAKERS selector to OFF.
15