Setting The Proxy - Onkyo BR-925UKD Instruction Manual

Advanced Setup—Continued
Entering DHCP Settings Manually
You can enter DHCP settings such as the IP address, sub-
net mask, default gateway, or DNS server manually. Fol-
low these steps when you want to assign the fixed IP
address for network connection, or to assign the DNS
server address specified by your ISP.
1 Press the [TOOLS] button.
2 Use the Up and Down [ ]/[ ] buttons to select
"Network", and then press [ENTER].
3 Use the Up and Down [ ]/[ ] buttons to select
"DHCP", and then press [ENTER].
4 Use the Up and Down [ ]/[ ] buttons to select
"Manual", and then press [ENTER].
5 Use the Up and Down [ ]/[ ] buttons to select
settings you want to enter, and then press
[ENTER].
6 Enter the settings.
Use the number buttons to enter, and then press
[ENTER] to save the settings.
Network
Network
Network
Network
7 Press the [RETURN] button.
The confirmation message appears. Select "OK" in
the "Save Setting?" message, and then press the
[ENTER]. After the "Saving Settings" message is
displayed, the screen returns to the menu list.
72
IP Address
:192. 168. XXX. XXX
Subnet Mask
:255. 255. XXX. XXX
GatewayAddress
:192. 168. XXX. XXX
DNS Address
:192. 168. XXX. XXX

Setting the Proxy

Configure the Proxy setting when your ISP specifies it.
If not specified, the Proxy setting is not necessary.
1 Press the [TOOLS] button.
2 Use the Up and Down [ ]/[ ] buttons to select
"Network", and then press [ENTER].
3 Use the Up and Down [ ]/[ ] buttons to select
"Proxy", and then press [ENTER].
4 Use the Up and Down [ ]/[ ] buttons to select
"On", and then press [ENTER].
5 Use the Up and Down [ ]/[ ] buttons to select
settings you want to enter, and then press
[ENTER].
6 Enter the settings.
Use the number buttons to enter, and then press
[ENTER] to save the settings.
Network
Proxy Port
Network
Proxy Address
a] proxy. XXX. jp
Network
Proxy UserName
a]
Network
Proxy Password
A]
7 Press the [RETURN] button.
The confirmation message appears. Select "OK" in
the "Save Setting?" message, and then press the
[ENTER]. After the "Saving Settings" message is
displayed, the screen returns to the menu list.
: 80
proxy