Setting The Bd Audio Mode; Adjusting The Picture - Onkyo BD-SP807 Instruction Manual

Setting the BD Audio Mode

BD-V
There are 2 ways to set "BD Audio Mode" setting;
whether to output the secondary and interactive audio
accompanied by the primary audio or only the primary
audio. Depending on the setting of the mode, Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS, or DTS-HD
output changes between multi LPCM and bitstream.
1
In stop mode with BD inserted, press [MODE].
2
Use [K / L] to select your desired setting.
BD Audio Mode
"HD Audio Output":
Only the primary audio will be output. Set this mode in
order to output Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS or DTS-HD audio of BD through HDMI
connection.
"Mix Audio Output":
If it is available, BD-video's secondary and interactive
audio will be output with the primary audio.
• The secondary audio is the audio for the secondary
video (Director's comment etc.) and the interactive
audio is the audio for the interactive application
(Button click sounds etc.).
3
Press [RETURN] to exit.
• You can also set "BD Audio Mode" from the setup
menu. Refer to page 42.
Note
• In "Mix Audio Output" mode, if there is no secondary
and interactive audio, the audio will be output as
"HD Audio Output" mode.
• In "Mix Audio Output" mode, even if you set "HDMI
Multi(Normal)" in "HDMI Audio Out" setting, multi
LPCM will be output from HDMI OUT jack for BD
audio. Refer to page 15.
• In "Mix Audio Output" mode with HDMI audio being
output, 2-channel down-mixed LPCM will be output
from AUDIO OUTPUT (DIGITAL OPTICAL/COAXIAL)
jack for BD audio.
• You can also set "BD Audio Mode" setting from the
setup menu. Refer to page 42.

Adjusting the Picture

BD-V DVD-V AVCHD
You can adjust the picture quality and store the setting
you have adjusted on memory 1-5.
1
During playback, press [MODE] repeatedly
until the picture adjustment menu appears.
Memory1
2
Use [K / L] to select a memory from
"Memory1" to "Memory5" to store your
setting, then press [ENTER].
EN
SPECIAL SETTINGS
HD Audio Output
DivX
3
Use [K / L] to select a item to be adjusted, then
use [s / B] or [ENTER] to adjust the setting.
2.
Brightness
1.
Contrast
6.
Noise Reduction
Item Description
Adjusts the
difference
1. Contrast between the bright
and dark parts of
the picture.
Adjusts the
2. Brightness brightness of the
picture.
Adjusts the
sharpness of the
3. Sharpness
picture for
frequency range.
Detailed
4. Gamma adjustment of the
Correction picture's
brightness.
Adjusts the
5. Color balance between
green and red.
6. Noise
Reduction
Reduces the noise
of the playback
(Not available
picture.
for BD/
AVCHD)
* Default setting
Note
• The setting remains even you turn the unit into the
standby mode except unplug the AC cord.
• For DivX files, noise reduction is not effective.
®
• Adjusting the picture is effective for HDMI OUT jack,
VIDEO OUTPUT (COMPONENT) jacks and VIDEO
OUTPUT (VIDEO) jacks.
0
+1
s B
Off Off
Adjustment range
-7 to +7 (0*)
0 to +15 (0*)
-6 to +6 (0*)
0 to +5 (0*)
-7 to +7 (0*)
Off*
1: Executes 3D noise
reduction which
detects and
deletes the noise
by comparing
each picture
frames.
2: Executes MPEG
noise reduction
which reduces
the block noise
and mosquito
noise on the
subtitle on movie.
3: Executes both
MPEG noise
reduction and 3D
noise reduction.
35