A-B Repeat; Pip (Picture In Picture) (Bonusview) Setting; Programme Playback - Onkyo BD-SP807 Instruction Manual

A-B Repeat

BD-V DVD-V AVCHD
You can play back the specific part (between point A and
point B) repeatedly.
1
During playback, press [A-B] at the desired
starting point A.
2
During playback, press [A-B] at the desired
ending point B.
As soon as you set the point B, the part between point
A and point B will start playback repeatedly.
• To cancel the A-B repeat, press [A-B] again.
Note
• Point B should be set within the same title or track as
point A.
• A-B repeat is not available with some scenes.
• To cancel the A point which was set, press [CLEAR].
• A-B repeat does not function during chapter, title,
track, group or all repeat playback.
• For some DivX files, A-B Repeat playback may not
®
function.
PIP (Picture in Picture) (BONUSVIEW)
Setting
BD-V
Some BD-video have the PIP (picture-in-picture) function
which enables you to display the secondary video in the
primary video. You can call up the secondary video by
pressing [PIP] whenever the scene contains the secondary
video.
primary
video
secondary
video
1
During playback, press [PIP].
PIP information will appear.
2
Use [K / L] to select the secondary video you
want.
• The secondary video will be displayed and the
secondary audio will be output.
3
Press [RETURN] or [PIP] to remove the PIP
information.
Note
• [MODE] can also be used instead of [PIP].
• The secondary audio will not be output when the
secondary audio is set to "Off" or when "BD Audio
Mode" is set to "HDMI Audio Out". Refer to
"Switching Audio Soundtrack" on page 34 and
"Setting the BD Audio Mode" on page 35.
30
SPECIAL PLAYBACK
DivX
CD

Programme Playback

JPEG
CD MP3
You can play back the disc in your desired order.
1
In stop mode, press [MODE].
• The programme screen will appear.
2
Use [K / L] to select a track / file, then press
[ENTER].
1 2 3
- - / 16
Program
CD_DA
8
0:36
9
1:14
10
0:45
11
0:50
12
0:53
13
0:20
14
0:54
Page Up Page Down
e.g.) audio CD
Track / File information
1
audio CD : "CD-DA" will be displayed.
2
MP3/JPEG : Current disc, SD Memory Card, or
folder name will be displayed.
Track / File : Track / File list in the original order
3
list
Programmed : Track / File list in the programmed
4
list order
Cumulative playback time of all tracks in the
5
programmed list
Playback status
6
Current page / Total page number
7
Operation : Press [A] to go to the previous page
8
guide in the track / file list.
Press [B] to go to the next page in
the track / file list.
Press [C] to go to the previous page
in the programmed list.
Press [D] to go to the next page in
the programmed list.
• For MP3 and JPEG files, use [K / L] to select a folder,
then press [ENTER] first, and then use [K / L] to
select a file, then press [ENTER].
• Press [CLEAR] to erase the last file of the programme.
• Use [K / L] to select "All Clear" at the bottom of the
list to erase all the tracks / files in the programme.
• The programmed tracks / files is displayed in the right
hand screen.
• Use [s / B] to go back forward between the
hierarchy of folders.
3
Press [PLAY B] to start programme playback.
• Programme playback will start.
To exit from the programme playback mode:
• Press [RETURN] in stop mode.
4 5 6
0 : 26 : 24
Total
2
1:14
4
0:50
9
1:14
11
0:50
12
0:53
14
0:54
8
0:36
7
Page Prev Page Next 8
EN