Software Configuration - Aiphone JKW-IP Quick Start Manual

Ip video entry system
Hide thumbs Also See for JKW-IP:
Table of Contents

Advertisement

6

SOFTWARE CONFIGURATION

Step 3: Install JKW-IP software on an Admin or User PC, using
the supplied CD or download it from http://www.aiphone.com
Follow the prompts during installation. The exact
prompts will vary depending on the existing software on the PC.
When you see the "Browse for Folder" window, specify a valid folder
to save recorded files to, such as Shared Documents (see Figure 4
to the right "Saved Recordings").
After installation is complete, launch the program.
Step 4: Register each adaptor with the JKW-IP software.
Right-click an empty slot in the Adaptor display and
choose Connect from the drop down menu (see Figure 5
to the right "Right click drop down menu").
This will open the Adaptor Registration window (see
Figure 6, to the right "Adaptor Registration").
a.
In the
Adaptor
o
IP address of the adaptor (or WAN IP
address if one was specified in step 2)
o
Connection Port (if changed in step 2)
o
Connection Password (default is "aiphone")
o
Web Port (if changed in step 2)
b.
In the
Admin User
(defaults for Admin ID are both "aiphone").
c.
In the
Network Interface Card: NIC
wireless network interface card that connects the PC to the
network containing this JKW-IP adaptor.
d.
In the
PC Application
network with NAT or IP Masquerading. If UPnP is turned off,
enter the following for incoming data to use:
o
PC Local (LAN) IP address and any 3 ports not blocked by
any firewall and not used by any other adaptor registered
to this PC.
o
PC Public (WAN) IP Address and ports should be the
same as the above unless the network admin says
otherwise.
Click [OK] and repeat step 3 for each computer and 4 for each
adaptor. Each adaptor‟s name should appear on the list for the slot
registered, and a status icon indicates the adaptor is ready to use.
Figure 7: Status Icon
box, enter:
box, enter Admin or User ID and password
box, select the wired or
box, leave UPnP ON unless using a
Figure 4: Saved Recordings
Figure 5: Right click drop down menu
Figure 6: Adaptor Registration
Pg. 5

Advertisement

Table of Contents
loading

Table of Contents