Technical Precautions - Aiphone GT SYSTEM Installation Manual

6-7 Initializing
All settings can be restored to their condition at the time of purchase.
1. Recorded pictures are erased and settings are reset.
2. Pre-set functions are not reset.
Settings reset with "Restor default setting"
Setting name
DATE/TIME
LANGUAGE
ENTRANCE CALL TONE
DOOR CALL TONE
GUARD CALL TONE
DOCTOR CALL
PRESS TO TALK
PICTURE MEMORY Pictures
Screen
CALL DURATION
NIGHT ILLUMINATION
ALARM INPUT
EXTERNAL INPUT (S1 to S3)
UTILITY-SENSOR Detection
Alarm timer
SECURITY-SENSOR Detection
Alarm timer
Alarm Transfer
DEPARTURE TIMER SETTING
ARRIVAL TIMER SETTING
SECURITY PIN
RESET SETTING
GUARD (GUARD 1 to 4)
* are initial settings.
7

TECHNICAL PRECAUTIONS

TECHNICAL PRECAUTIONS
• Operating temperature: Entrance station: -10
Residential station: 0
Security guard station: 0
Control unit: 0
• Mounting location: Do not install the entrance station in a place where there would be a bright light behind a visitor (or where there would be
a bright background) or in a place where the camera lens would be directly exposed to sunlight or a bright light.
Entrance stations (integrated type) include a people sensor. Do not places objects such as plants or trees in places moni-
tored by the sensor.
Also, placing the unit in very bright sunlit areas may prevent the sensor from working properly.
• Rain hood (option): Although the entrance station is weather resistant, it is recommended that it not be directly exposed to weather conditions.
The rain hood can be installed to protect the entrance station from rainfall.
• Post-replacement setup: After all wiring is completed and the residential station has been replaced, turn off the power to the GT-BC temporarily
and then turn it back on.
Next, reprogram the relevant residential station.
• Cleaning: Clean the units with a soft cloth dampened with a neutral household cleanser. Do not use any abrasive cleaner or cloth.
The sensitivity of the sensor on an entrance station (Integrated type) will be reduced if it is dirty. Periodically perform
cleaning.
• Repair requests: When units do not operate properly, request a qualified technician for repairs.
Description
JAN/01/2011 00 : 00
ENG FRA DEU ITA NED ESP
1 • 2 • 3 • 4 • 5
1 • 2 • 3 • 4 • 5
1 • 2 • 3 • 4 • 5
ENABLE DISABLE
ENABLE DISABLE
All saved pictures are erased.
• Zoom X 6
• Wide X 6
• Zoom X 3, Wide X 3
• Wide X 3, Zoom X 3
30 sec. • 45 sec. • 60 sec. • 90 sec. • 120 sec.
ENABLE • DISABLE
DISABLE • N/O • N/C
DISABLE • UTILITY • SECURITY
N/O • N/C
10 sec. • 1 min. • 10 min. • 1HOUR • CONT
N/O • N/C
10 sec. • 1 min. • 10 min. • 1HOUR • CONT
ENABLE • DISABLE
0 sec. • 30 sec. • 60 sec. • 120 sec. • 300 sec. •
600 sec.
0 sec. • 30 sec. • 60 sec. • 120 sec. • 300 sec. •
600 sec.
S • X • T • W
ENABLE • DISABLE
GUARD • RECEPTION • CONCIERGE • NOT
DISPLAYED
to +60 (+14 °F to +140 °F)
to +40
to +40
to +40 (+32 °F to +104 °F)
1
After performing steps 1 in section 6-1, select "INITIALIZE"
in the "INSTALLATION" screen and press the [
button.
2
Press the [
perform initialization. Press the [
cancel initialization and return to the previous screen.
3
The status LED and tone off LED light up during initialization.
The screen goes out when initialization is complete. (The sta-
tus LED blinks.)
(+32 °F to +104 °F)
(+32 °F to +104 °F)
- 58 -
MENU] button in the "INITIALIZE" screen to
REC/PLAY] button to
INITIALIZE
RETURNING TO DEFAULT ?
THIS OPERATION CANNOT BE CANCELED.
NO YES
MENU]