Advertisement
Step11:
Select "Update" and push [ENTER].
Updating will begin.
As the updating progresses, the TV screen may
disappear depending on the program updated. In this
case, you can see the update progress on the front
display of the AV receiver/controller. The TV screen
will reappear when you finish the update and turn on
the AV receiver/controller.
Do not turn off the AV receiver/controller and do not
remove the USB storage device during updating process.
Step12:
Message "OK:Sum = ********" appears on the front
display of the AV receiver/controller, indicating that the
update has been completed. (Alpha-numeric characters
on the front display are denoted by asterisks.)
Step13:
Using the [ON/STANDBY] button on the front panel,
turn off the AV receiver/controller and then remove
the USB storage device.
*
Do not use the [ON] or [STANDBY] button on the remote con-
troller.
Step14:
Push [ON/STANDBY] to turn on the
AV receiver/controller.
Congratulations!! Now you have the latest firmware
on your Onkyo AV receiver/controller.
Troubleshooting
Case1:
If "No Update" is displayed on the front display of the
AV receiver/controller as below, the firmware has
already been updated. You do not need to do anything
further.
En
SN 29400292A
(C) Copyright 2009 ONKYO CORPORATION Japan. All rights reserved.
Case2:
If an error occurs, "Error!! *-**" is displayed on the
front display of the AV receiver/controller. (Alpha-
numeric characters on the front display are denoted by
asterisks.) The example below is displaying error code
0-10. See the following table and take appropriate
action.
Errors during update via USB (excluding TX-NR1007)
Error Code
*-10, *-20
USB storage device is not detected. Make
sure the USB flash memory or USB cable is
properly connected to the USB port. If the USB
storage device has its own power supply, use it
to power the USB storage device.
*-14
An update file is not found in the root folder of
the USB storage device, or an update file is for
other model. Retry download following
instructions at the support website. If the error
persists, please contact Onkyo Support
(indicated at the end of this page) and provide
the error code.
Others
Retry the update procedure from the
beginning. If the error persists, please contact
Onkyo Support (indicated at the end of this
page) and provide the error code.
ONKYO CORPORATION
2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
The Americas
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: +1-800-229-1687, +1-201-785-2600
Fax: +1-201-785-2650
http://www.us.onkyo.com/
Europe
ONKYO EUROPE ELECTRONICS GmbH
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: +49-8142-4401-0 Fax: +49-8142-4401-555
http://www.eu.onkyo.com/
China, Hong Kong
ONKYO CHINA LIMITED
Unit 1&12, 9/F, Ever Gain PlazaTower 1, 88, Container Port Road,
Kwai Chung, N.T., HONG KONG
Tel: 852-2429-3118 Fax: 852-2428-9039
http://www.onkyochina.com/
Asia, Oceania, Middle East, Africa
Please contact an ONKYO distributor referring to Onkyo
SUPPORT site.
<http://www.intl.onkyo.com/support/local_support/index.html>
* 2 9 4 0 0 2 9 2 A *
Description
Y0910-2
Advertisement
