Omega RS-310-EDP Operation Manual page 3

• The second setting (programmed by the "unlock" button) changes the
lock and unlock outputs to be a longer 3 second pulse output. This is for certain
vehicles which require a longer output pulse from the system's control unit;
typically cars having vacuum pump systems, although the longer setting is also
more suitable in some newer vehicles.
• Some newer vehicles require a double pulse output to remotely unlock the doors
and/or to disarm a factory-equipped security system, which is what the Double
Pulse Unlock setting provides (it is programmed by the "trunk" button ). The
lock output pulse, in this setting, is 0.8 second.
• The Total Closure Lock Output (programmed by the "start" button) may be
used with vehicles which are originally equipped with the total-closure feature.
Typically, a total closure feature is when locking the vehicle's doors if the key
in the door is held to "lock" for a period of time the vehicle will close all
windows and the sunroof, in addition to locking the doors.
Selecting this feature setting changes the system's door lock output pulse from
a 0.8 second to as long as a 28 second duration output. The unlock output is 0.8
seconds in this setting.
Note: When this feature is turned on, during the 28 second period after arm-
ing the system, the lock output can be stopped on demand by pressing the
"lock" or "unlock" button. Only the output will stop- pressing
either button again will normally operate the system, and at any time after the
28 second lock output period ends.
Feature #7 Turbo Timer
Factory Default Setting: Off ( press "lock" button to program
Options:
Run 1 Minute ( press "unlock" button to program
press "trunk" button to program
Run 2 Minutes (
press "start" button to program
Run 3 Minutes (
This feature when turned on configures the RS-310-EDP to automatically keep the
engine running briefly after it is turned off. This operation is designed specifically
for vehicles having turbocharged engines (the user may temporarily bypass the
feature if desired).
This feature should only be programmed by the installer, and the operation of
this feature depends on the correct connection of the safety wire to the vehicle's
parking brake. Please refer to the "Black/White wire" in the installation manual for
the proper connection of this important wire.
)
)
)
)
Page - 18
Introduction
Welcome to the convenience which is offered by your RS-310-EDP
keyless entry & remote start system. The RS-310-EDP is designed and
manufactured by Omega Research and Development, a world leader in
vehicle convenience and security since 1975. Your system offers easy,
carefree operation, and the modular design allows its many impressive
features to be customized to suit your needs. Omega systems are designed
for professional installation, and are available only through new car retail
outlets and selected mobile electronics specialist dealers.
Please note that this guide is written to reflect:
- That a power doorlock interface is installed with your system
(the RS-310-EDP also operates your power doorlocks). The type
of interface may vary from one vehicle to the other, and in some
cases may involve optional components.
- That the RS-310-EDP operating the vehicle's existing horn is
an available option.
- That the Programmable Features are in the default settings;
the operations of these features are also explained.
Your RS-310-EDP system has three principal user components: the
Blue LED Status Light, the Valet Switch, and the Remote Transmitter.
The Blue LED Status Lights
different conditions the system is in, and also serves as a visual deterrent
to break-ins and theft. Specific operations of this light are described on
pages 9-10.
The Valet Switch is used to access Valet Mode, which allows the
operator to suspend some of the security system's normal functions for as
long as desired. The Valet Switch may also be used, instead of the remote
transmitter, to override a locked system. The Valet Switch is also used when
programming remote transmitters and system features. See "Using the
Valet Switch" on page 8.
Transmitter s are used to operate the RS-310-EDP. Each system is
capable of being operated by up to four different remote Transmitters. The
remote transmitter has four push-button switches, each being labeled with
an icon as to function.
However, a popular upgrade option is the Echo 2-way controller. The
Echo, in addition to operating your system, also receives signals from the
system, and displays a variety of system conditions on its LCD screen. A
section of this booklet describes operating the RS-310-EDP with the Echo.
informs you at a glance which of the
Page - 3