Omega RS-210-DP Operation Manual

Advertisement

L I M I T E D
L I F E T I M E
Products manufactured and sold by OMEGA RESEARCH & DEVELOPMENT,
INC. (the "Company"), are warranted to be free from defects in materials and
workmanship under normal use. If a product sold by the Company proves to be
defective, the Company will repair or replace it free of charge within the first year
and thereafter all parts to be repaired will be free with only a nominal charge for
Omega's labor and return shipping, to the original owner during the lifetime of the
car in which it was originally installed.
All products for warranty repair must be sent postage prepaid to Omega
Research & Development, Inc., P.O. Box 508, Douglasville, Georgia 30133, or
send via UPS to: 981 N. Burnt Hickory Rd., Douglasville, Georgia 30134, with
bill of sale or other dated proof of purchase. This warranty is nontransferable and
does not apply to any product damaged by accident, physical or electrical misuse
BACK COVER
or abuse, improper installation, alteration, any use contrary to its intended
function, unauthorized service, fire, flood, lightning, or other acts of God.
PRINTER'S NOTE:
This warranty limits the Company's liability to the repair or replacement of
the product. The Company shall not be responsible for removal and/or reinstallation
production back cover
charges, damage to or theft of the vehicle or its contents, or any incidental or
consequential damages caused by any failure or alleged failure of the product to
is color; this is a
function properly. UNDER NO CIRCUMSTANCES SHOULD THIS
WARRANTY, OR THE PRODUCT COVERED BY IT, BE CONSTRUED
place marker cover.
AS A GUARANTEE OR INSURANCE POLICY AGAINST LOSS. The
Company neither assumes nor authorizes any person or organization to make any
warranties or assume any liability in connection with the sale, installation, or use
of this product.
This device complies with F.C.C Rules part 15. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference
and, (2) This device must accept any interference that may be received, including
interference that may cause undesired operation.
The manufacturer is not responsible for any radio TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user's authority to operate the equipment.
Omega Research and Development, Inc.
P. O. Box 508
Douglasville, Georgia
www.caralarm.com
W A R R A N T Y
30133
07/08 MO-RS-210-DP REV0
Omega
RS-210-DP
OPERATION MANUAL
FRONT COVER
PRINTER'S NOTE:
production front cover
is color; this is a
place marker cover.
COPYRIGHT 2007: OMEGA RESEARCH & DEVELOPMENT, INC.

Advertisement

Table of Contents
loading

Summary of Contents for Omega RS-210-DP

  • Page 1 Company will repair or replace it free of charge within the first year and thereafter all parts to be repaired will be free with only a nominal charge for Omega's labor and return shipping, to the original owner during the lifetime of the RS-210-DP car in which it was originally installed.
  • Page 2: Table Of Contents

    How to Program Features ............9-10 - IMPORTANT - User Programmable Features ..........10-11 The RS-210-DP has many programmable features which can offer Installer Programmable Features ..........11-14 more operations than those described in the basic system instruc- Complete Programmable Features Matrix ......15 tions.
  • Page 3 Run 3 Minutes icon as to indicate its primary function. This feature when turned on configures the RS-210-DP to automatically keep the engine running briefly after it is turned off. This operation is designed specifically for vehicles having turbocharged engines (the user may temporarily bypass the The Window Unit With Status Light &...
  • Page 4: Valet Switch Overview

    Feature #3 Gasoline Or Diesel Engine press brake pedal 1x to program Factory Default Setting Gasoline The Blue Status Lights report the operational status Option: Diesel press brake pedal 2x to program of the system at all times, and also serves as a visual This feature changes the system's timing of the ignition and starter output sequence deterrent to break-ins and theft.
  • Page 5: Using The Rs-210-Dp System

    3x to program start operation. Do not turn the key to the "Start" position! This feature selects the RS-210-DP processor’s method of determining the status of If you decide not to drive your car after remote starting, you can simply the engine running during remote start operation.
  • Page 6: Using The Valet Switch

    Using The Valet Switch Feature #1 Remote Start Run Time press brake pedal 1x to program Factory Default Setting 10 Minutes ( Valet Mode Options: The system may be placed into a “valet mode” which prevents the press brake pedal 2x to program 5 Minutes remote start feature from being activated.
  • Page 7: Other Remote Start Features

    With the engine running, hold the brake pedal and engage the parking • Many features have third, and even fourth setting options. Pressing the brake brake. When the brake pedal is released, the RS-210-DP will keep the pedal 3 or 4 times will select these options. Status Light & parking lights engine running for the selected time, and then automatically turn it off.
  • Page 8: Transmitter Protection

    How to Program Transmitters The Status Light also indicates the remote start status: The RS-210-DP system is capable of being operated by as many as four 4) Off = The remote starter system is off and in standby mode. transmitters. Additional transmitters must be programmed to the system in 5) Flashing Slow (after sending the remote start command) = The engine order to operate it (the originals, were programmed at the factory).

Table of Contents