Custom Setup - Olympus MACRO FLASH SYSTEM Instructions Manual

CUSTOM SETUP

Custom setup allows each user to customize flash setup to suit his or her preferences.
MACRO FLASH CONTROLLER
FC-1
LIGHT
RATIO GN/
Mode display
Setup mode
AF illuminator
lamp
LAMP timer
Light intensity
adjustment
Guide number
display
Guide number
Unit of distance
• Custom setup can be performed separately for the Ring Flash (RING) and Twin Flash (TWIN).
Setup procedure
1.
Turn the Macro Flash Controller on.
MODE
2.
Press and hold the MODE button for more than 2 sec-
LAMP
onds, until the setup mode display appears in the control
AUTO
CHECK
panel.
TEST/
CHARGE
3.
POWER
Turn dial A to select the setup mode.
4.
Turn dial B to select the value.
5.
Press the MODE button to exit from setup and return to
the previous control panel display.
Value display
Dial A Dial B
Function
AF illuminator is activated according to the control
from the camera.
AF illuminator is defeated.
The lighting time of the modeling lamp can be set.
Selectable time: 1" (1 sec.) ~ 10", 15", 20", 25", 30",
40", 50", 60" and – –" (3 min.)
Light intensity cannot be adjusted.
Light intensity can be adjusted.
The light intensity in MANUAL mode is displayed in
terms of light intensity ratio.
The light intensity in MANUAL mode is displayed in
terms of guide number.
Guide numbers are displayed in meters.
Guide numbers are displayed in feet.
Default
A
30"
OFF
OFF
m