Custom Setup - Olympus FL 50R Instruction Manual

Custom setup

Custom setup allows you to customize the electronic flash to suit your
preferences.
MODE button
Dial B
Dial A
Setup mode
AF illuminator
Flash cable
30
EN
1
Press and hold the MODE button for
more than 2 seconds, until the setup
mode display appears in the control
panel.
2
Turn dial A to select the setup mode.
3
Turn dial B to select the value.
4
Press the MODE button to confirm the
setup.
Mode display
Dial A
Value
display
Function
Dial B
AF illuminator is
activated according
to the control from
the camera.
AF illuminator is off.
Use this setting
when not using
the flash cable
(attaching to the
hot shoe or using a
clip-on).
Use this setting
when using the
flash cable (off-flash
cable).
Default
value
A
on