Selecting The Control Mode - Olympus MACRO FLASH SYSTEM Instructions Manual

<Selecting the control mode>
MACRO FLASH CONTROLLER
FC-1
LIGHT
RATIO GN/
Flash control Control panel
mode display
TTL AUTO
MANUAL
Notes
• Certain modes may be unavailable depending on the shooting mode set on the camera.
• It is not possible to select an unavailable mode.
1.
Press the Shutter button of the camera gently to start com-
munication of shooting information including ISO speed,
MODE
lens iris and shutter speed between the camera and Macro
LAMP
Flash System.
• The selected flash control mode is shown on the control
AUTO
CHECK
panel.
• The mode is switched every time the MODE button is
TEST/
CHARGE
pressed.
Control operation
Flash is controlled automatically by
performing pre-flash according to
the camera setup.
Flash is performed at the manually
set light intensity
Main applications
Usually use this mode with a digital
camera with communication capa-
bility.
Shooting using manual flash.