Table of Contents
Advertisement
8.
9.
For single in-line resistor packages, pin 1 is marked with a dot. For dual in-line integrated circuit packages, pin 1 is
either marked with a dot, or pin 1 is to the left (as viewed from top) of indication at end of integrated circuit
package. e.g.:
Pin locations for other semi-conductors are shown below:
80
Table 6-1. Schematic Diagram Notes (continued)
indicates multiple paths represented by only one line. Reference designators with pin
numbers indicate destination, or signal names identify individual paths. Numbers
indicate number of paths represented by the line.
Advertisement
Table of Contents
Troubleshooting
