Chapter I. Installing The Scanner; Software Installation Requirements; Hardware Requirements - AgfaPhoto AS 1300 User Manual

Chapter I. Installing the Scanner

Before installing your scanner, please verify that you have all of the proper
components. A list of the package contents is provided in the Box Contents section of
this guide.

Software Installation Requirements

Your scanner comes with the image-editing software, OCR software, document
management software, the scanner's driver, and the DigiScan software. All of these
software applications use approximately 400 megabytes of hard disk space after they
are installed into your computer. To ensure ample room for the installation, as well as
for scanning and saving images, a minimum of 450 megabytes of hard disk space is
recommended.
The USB scanner can only operate under the Windows 2000 Professional/ XP/
Vista operating system.
Please do not use multiple USB scanners in Windows XP
simultaneously! For more information, please refer to the following
URL...http://www.microsoft.com
Attention

Hardware Requirements

This scanner connects to your computer through the Universal Serial Bus (USB),
which supports hot Plug and Play. To determine whether your computer is USB-
capable, you must check the rear of your PC to locate a USB jack that looks the same
as the one pictured below. Note that on some computers, the USB port at the rear of
the computer may be occupied and additional ports may be found on the monitor or
keyboard. If you are having trouble in locating the USB port on your computer, please
refer to the hardware manual that came with your computer.
6